Standard Horizon FF525 Operation Manual page 2

This guide relates to the following GPS CHART PLOTTERS:
CP180, CP180i, CP190i, CP300, CP300i, CPV350, CP390i, CP500, CP590 and CPV550.
For older GPS Chart Plotters, the manual is available for download at
www.standardhorizon.com or by contacting Marine Product Support at 800-
767-2450 ext 6800.
FCC Compliance Statement
This device complies with Part 15 of the FCC limits for Class A digital devices. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed or used in accordance with the instructions may cause harmful interference
with radio communications.
There is no guarantee that interference will not occur in a particular instance. If this
equipment does cause harmful interference to other equipment, try to correct the
problem by relocating the equipment.
Consult an authorized STANDARD HORIZON dealer or other qualified service
technician if the problem cannot be corrected. Operation is subject to the following
conditions: (1) This device cannot cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
- The FF525 contains dangerous high-voltage circuits which only experienced
technicians can handle.
- STANDARD HORIZON will not be liable for errors contained herein, or for
incidental or consequential damages in connection with the performance or use of
this material.
- Because we frequently update our software and applications, the pictures shown
through this Owner's Manual may be slightly different from what you see.
- When plugging in or unplugging a transducer to the FF525 make sure power is
turned off.
- This Owner' Manual is for GPS Chart Plotters with software version 16.50 and later.
Copyright 2012. YAESU MUSEN CO., LTD. All rights reserved. Printed in Italy.
No portion of this manual may be reproduced without the permission of YAESU MUSEN CO., LTD.
Page 4
CODE: Operation Manual - Issue C - 100212e
CAUTION
WARNING
WARNING