Setup/Security Settings Tab - Lincoln Electric POWER WAVE MANAGER IM8002 Operator's Manual

User Interface
If you're not sure the selection in the drop-down refers to the actual user interface you want to review,
click the Blink status light button. This causes the green status light on the User Interface to start blinking
rapidly, and you can verify you have the correct device selected in Power Wave® Manager.

Setup/Security Settings Tab

The Setup/Security Settings tab allows the user to modify several User Interface parameters and security
settings. The parameters and settings available on this tab vary depending on the User Interface
connected. Please refer to the appropriate Operator Manual for more detailed information on these
parameters.
To change a parameter, double-click the parameter to open the edit window (Figure 8.5). Simply make
your change and click OK.
IM8002
Figure 8.4 Multiple User Interface Drop-down
Figure 8.5 Setup/Security Settings Tab
Power Wave® Manager User Manual
Chapter 8. Wire Feeder
8.5