Chapter 5. System Status
Module Information Tab
The Module information tab displays information about each hardware module attached to the Welding
Power Source. This information includes versions of the hardware and firmware of each module, serial
numbers, Weld Set name, and miscellaneous information such as firmware revision numbers and
checksums. You can switch between different sub-tabs to view information about the corresponding
hardware module.
TIP
5.4
|
The Software Version is important to know when updating
the firmware on the Welding Power Source. See step 7 on
page 3.3.
Figure 5.4
Module Information Tab
Power Wave® Manager User Manual
Module Information Tab
IM8002