Chapter 7. Network Settings
NOTE |
Weld Sequencer Tab
The Weld sequencer tab contains advanced configuration settings for the Weld Sequencer component of
the system. It presents an array of sequencer-controlled system attributes, grouped by welding state. This
useful diagnostic tool can help you verify that the settings are correct. If you need to modify a system
variable, double-click the appropriate cell. Refer to the DeviceNet documentation provided by Lincoln
Electric for more information.
7.12
Figure 7.9
Updating the firmware on the Welding Power Source may
cause the limits of some procedures to change.
Figure 7.10 Weld Sequencer Tab
Power Wave® Manager User Manual
Weld Limits Tab
DeviceNet
IM8002