Friedrich ZQ08C10 Service And Parts Manual page 5

CONTROLS - "CP" MODELS
DIS P L AY
3 5
Precaution: The Remote Control unit will not function properly if strong light shines on the sensor window of the air
conditioner or if there are obstacles between the Remote Control unit and the air conditioner.
Refer to Fig B&Fig C
POWER BUTTON
To turn the air conditioner ON and OFF.
This button takes priority over any other buttons.
TEMPERATURE SETTING BUTTON
This button can control temperature of the room. The temperature can be adjusted within a range of 60 F to 86 F
o
by 1F,Select the lower number for lower temperature of the room.
OPERATION MODE SELECTION BUTTON
Push this button, it will shift operation between COOL, ENERGY SAVER, FAN and DRY modes.
- Energy Saver: If Energy Save mode is selected, the fan stops when the compressor stops running
Approximately every 3 minutes the fan will turn on and check the room air to determine if cooling is needed.
FAN SPEED SELECTOR
Push this button, to shift fan speeds, as follows.
(Hi ➔ Low ➔ Med ➔ Hi ➔ Low ➔...)
ON/OFF TIMER BUTTON
ON - When the air conditioner is off, it can be set to automatically turn on.
OFF - When the airconditioner is on, it can be set to automatically turn off.
2 6
4 1
Fig B
R E MOT E C ONT R OL
5
—5—
Power
1
Te mp
2
Fan S peed
4
T imer Mode
3
Fig C
o
o