Other Phone Features (6757I Ct Handset); Adjusting The Volume; Handset Status Light (Led); Alerter Tones - Aastra 6757i CT Installation Manual

Other Phone Features (6757i CT Handset)

Adjusting the Volume

Receiver Volume
When on a call and while not in any edit mode, the handset's receive
volume can be adjusted using the volume control bar located on the side of
the handset. The display feedback is a speaker facing the right side of the
display with a rectangular box on the right side of the speaker. This box
indicates the relative volume of the receiver volume:
Alerter Volume
The volume control bar is also used to adjust the alerter volume while the
set is idle or while the set is alerting (ringing).
The alert volume icon indicates that the alerter volume is shown while the
volume bar shows the relative volume:
¬e
from off ( ) to full volume (

Handset Status Light (LED)

The multifunction Handset LED provides the following user feedback:
Handset LED Status Description
Slow Flash
Rapid Flash
Intermittent Flash
Intermediate Flash
ON solid

Alerter Tones

The 6757i CT cordless handset uses tones to provide information as
follows:
Handset Alerter Tones
Alerting
Battery
Hold
¬c
¬a
)
Indicates you have a message(s).
Indicates an alerter tone is in progress. (See next
paragraph).
Indicates the phone is set on "mute".
Indicates the call is on hold.
Indicates you are on an active call.
Description
Provides user selected alerter tones.
Provides "Battery low" warning tone every 3
minutes.
Provides "Flash ring" to notify of call on hold.
Model 6757i CT IP Phone Installation Guide
lb
. The volume levels range
29