Memory Recall - Sony ILCA-77M2 Use Instructions

When [Picture Effect] is set to [HDR Painting] or [Rich-tone Mono.].
When the [Multi Frame NR] function is activated.
When the [Drive Mode] function is set to [Cont. Shooting], [Cont. Bracket], [Self-timer(Cont)].
If you use the above functions when the shutter speed is set to [BULB], the shutter speed
is temporarily set to 30 seconds.
Hint
Images shot in [BULB] mode tend to be blurry. We recommend that you use a tripod or a
remote commander (sold separately) that has a shutter button lock function.
[45] How to Use

Memory recall

Allows you to shoot an image after recalling often-used modes or camera settings registered
in advance.
1. Set the mode dial to 1, 2 or 3 (Memory recall).
2. Press on the center of the multi-selector.
Note
Register shooting settings in advance by [Memory].
If you set [Memory recall] after completing the shooting settings, the registered settings
are given priority and the original settings may become invalid. Check the indicators on
the screen before shooting.
[46] How to Use
Movie
You can adjust the shutter speed or aperture value to your desired settings for recording
movies. You can also check the image angle before shooting.
1. Set the mode dial to
2. MENU →
When [Mode Dial Guide] is set to [On], you can select the desired settings after you
Shooting Selecting a shooting mode
Shooting Selecting a shooting mode
(Movie).
(Camera Settings) → [Movie] → desired setting.