Cleaning Mode; Pal/Ntsc Selector - Sony ILCA-77M2 Use Instructions

[202] How to Use

PAL/NTSC Selector

Plays back movies recorded with the product on a PAL/NTSC system TV.
1. MENU →
Note
This function is provided with 1080 50i-compatible devices only. It is not provided with
1080 60i-compatible devices. The 1080 50i-compatible devices have a "50i" mark on the
bottom of the product.
If you insert a memory card that has previously been formatted with the PAL system, a
message telling you that you must re-format the card appears. When you record using the
NTSC system, re-format the memory card or use another memory card.
When the NTSC mode is selected, the "Running on NTSC." message always appears on
the start-up screen each time you turn the product on.
[203] How to Use

Cleaning Mode

Allows you to clean the image sensor.
1. Confirm that the battery has been charged sufficiently.
2. MENU →
3. Turn off the product following the instructions on the screen.
4. Detach the lens.
5. Push the mirror lock lever (A) and open the mirror.
Changing settings
(Setup) → [PAL/NTSC Selector] → [Enter]
Changing settings
(Setup) → [Cleaning Mode] → [Enter]
Setup menu
Setup menu