Multi Frame Nr - Sony ILCA-77M2 Use Instructions

ISO 100. When you finish recording the movie, the ISO value returns to the original
setting.
When you use [Multi Frame NR], it takes some time for the product to perform the overlay
processing of images.
Hint
You can change the automatically set ISO sensitivity range for the [ISO AUTO] mode.
Select [ISO AUTO], press the right side of the multi-selector, and set the desired values
for [ISO AUTO Maximum] and [ISO AUTO Minimum]. The values for [ISO AUTO
Maximum] and [ISO AUTO Minimum] are also applied when shooting in [ISO AUTO]
mode under [Multi Frame NR].
[114] How to Use

Multi Frame NR

The product automatically shoots multiple images continuously, combines them, reduces the
noise, and records them as one image. With multi frame noise reduction, you can select
larger ISO numbers than the maximum ISO sensitivity. The image recorded is one combined
image.
1. MENU →
2. Press the right side of the multi-selector to display the setting screen, then select a
desired value using the top/bottom side of the multi-selector.
Note
When [ Quality] is set to [RAW] or [RAW & JPEG], this function cannot be used.
The flash, [D-Range Opt.], and [Auto HDR] cannot be used.
You cannot set [Multi Frame NR] when [Picture Effect] is set.
Hint
You can change the automatically set range of ISO sensitivity in the [ISO AUTO] mode
under [Multi Frame NR]. Select [ISO AUTO] under [ISO] and press the right side of the
multi-selector, and set the desired values for [ISO AUTO Maximum] and [ISO AUTO
Minimum]. The values for [ISO AUTO Maximum] and [ISO AUTO Minimum] are also
applied when shooting in [ISO AUTO] mode under [Multi Frame NR].
[115] How to Use
Using shooting functions
(Camera Settings) → [ISO] → [Multi Frame NR].
Using shooting functions
Selecting the ISO sensitivity
Selecting the ISO sensitivity