Flash Comp - Sony ILCA-77M2 Use Instructions

Rear Sync.:
The flash works right before the exposure is completed every time you trigger the shutter.
Rear sync shooting allows you to shoot a natural image of the trail of a moving subject such
as a moving car or a walking person.
Wireless:
Allows you to shoot by removing the remote control-compatible external flash (sold
separately) and using it at a distance from the camera. The shading effect gives the subject
a more three-dimensional feel.
High speed synchronization:
High speed synchronization function (HSS) can be used only when an HSS-capable external
flash (sold separately) is attached to the product. An HSS flash operates by sending multiple
small bursts of light at high speed to simulate the effect of one long burst of flash so that you
can shoot images with flash at all shutter speeds.
*
High speed synchronization function (HSS) is also available during wireless flash shooting.
Note
The default setting depends on the shooting mode.
Available flash mode depends on the shooting mode.
[54] How to Use

Flash Comp.

Adjusts the amount of flash light in a range of –3.0 EV to +3.0 EV.
Flash compensation changes the amount of flash light only. Exposure compensation
changes the amount of flash light along with the change of the shutter speed and aperture.
1. MENU →
Selecting higher values (+ side) makes the flash level higher, and lower values (– side)
makes the flash level lower.
Note
The higher flash effect may not be visible due to the limited amount of flash light
available, if the subject is outside the maximum range of the flash. If the subject is very
close, the lower flash effect may not be visible.
Using shooting functions
(Camera Settings) → [Flash Comp.] → desired setting.
Using the flash