Sony ILCA-77M2 Use Instructions page 188

[Manual Setting] and set the access point.
*
For the input method, refer to "How to use the keyboard."
If you select [Manual Setting], input the SSID name of the access point, then select
the security system.
3. Input the password, and select [OK].
Access points without the
4. Select [OK].
How to use the keyboard
When manual character entry is required, a keyboard is displayed on the screen.
1. Input box The characters you entered are displayed.
2. Switch character types Each time you press
selector, the character type switches among alphabet letters, numerals and symbols.
3. Keyboard Each time you press
displayed.
For example: If you want to enter "abd"
Select the key for "abc" and press
cursor) and press
select the key for "def" and press
4. Finalize Finalizes the entered characters.
5. Move cursor Moves the cursor in the input box to the right or left.
6. Delete Deletes the character preceding the cursor.
7. Switches the next character to a capital or small letter.
8. Enters a space.
mark do not require a password.
on the center, the character that you enter will be
once to display "a" → select "
→ select the key for "abc" and press
once to display "d".
on the center of the multi-
"((5) Move
twice to display "b" →