General Set Up Screen - GE 40350 Installation And Start-Up Manual

General set up screen

For general set up, press and hold the left arrow and right arrow
NOTE: Date and Time were set at the factory and stored in the control panel memory. The Exercise Cycle was
also set at the factory. The default exercise cycle occurs on Tuesdays, at 2:00 P.M. Central Standard Time.
To updated or change these settings, follow the steps below.
SET DATE
or
SET TIME
or
SET EXERCISE
CYCLE
EVENT
LOG
30
YEAR
ok
FLASHING
or
HOURS
ok
FLASHING
or
If set to OFF, display will read: EXERCISE CYCLE OFF
OFF
or
DAY OF WEEK
ok
FLASHING
or
Display will scroll last service code event, date, time, and
ok
temperature of when the event occured.
IF DURING PROGRAMMING NO BUTTONS ARE PRESSED FOR 30 SECONDS,
THE CONTROL PANEL WILL AUTOMATICALLY EXIT THE PROGRAM MODE.
o k
ok
o k
for 3 seconds. Follow the prompts as outlined below.
MONTH
ok
ok
FLASHING
or
MIN
ok
ok
FLASHING
or
HOURS
ok
ok
FLASHING
or
DAY##
ok
FLASHING
or
AM/PM
ok
FLASHING
or
MIN
AM/PM
ok
FLASHING
FLASHING
or
ok
ok
or
ok
or
or