Quick Installation Guide For Touch Panel Driver - Logic Controls LE1000 User Manual

Quick Installation Guide for Touch Panel Driver

The Driver supports a lot of operating systems, i.e. Windows 95, Windows 98,
Windows ME, Windows NT4, Windows 2000, Windows XP, Windows XP Tablet PC
Edition, Windows CE2.12/3.0/.NET, DOS, iMac, RedHat / Mandrake Linux.
Follow these steps to install Touch Panel Driver.
1. Put the Driver CD to CD-ROM.
2. Change directory to Win9X_ME or other directories depends on your operating
system.
3. Double click the Setup.exe, then windows starts to run the installation program.
Notice that does not plug the USB controller or RS-232 controller on the system
before the installation has been finished.
4. Just click [Next >] button to continue installation.
5. Then check the check box if PS/2 touch controller is to be installed. The default is
unchecked. Then Press [Next >] to continue installation.
6. Choose the setup type that best suits your needs. There are two accessory
utilities for choosing, Rotation Monitor Utility and Shutdown Utility. Users can
install the utility they want by checking the box. Then Press [Next >] to continue
installation.
7. Select the appropriate folder where set-up files will be installed. Then Press [Next
>] to continue installation.
8. Then type in the name of program folder for the touch panel driver or press [Next
>] to continue. There will be a default name for it.
9. Windows is copying files to disk and the setup is complete. It will request re-boot
computer. Press [Yes >] to re-boot immediately or [No >] to re-boot later. The
installation will not be finished until system re-boot.
Setup is complete. After the touch panel driver installation, the USB device will
10.
be found automatically as soon as it was plugged into the computer. Then users
can see the new device on the application program window. And, the program will
remove the USB Device automatically as soon as it was unplugged. ( USB device is
not supported for Windows95 )