Programming Rules
Use blank spaces exactly as shown in the command descriptions,
examples, and syntax. Blank spaces are the delimiters between
parameters. Omitting a necessary space may result in incorrect
programming or a failure to recognize commands.
In CPL-RFID programming, the RFID specific directives are case-
sensitive and must be fully spelled-out.
Certain CPL-RFID commands operate outside of the standard label
formatting. The commands that start with the !RFID command verb
need not be placed between a header line and an END command.
RFID Command Name Structure
RFID commands described in this chapter will use the following
conventions:
RFID Command Name
Function
Explicit Form
Parameters
Command Type
Copyright © 2004, Cognitive.
Purpose of the command
Proper sequence for using the command and its
parameters
Variables or conditions that may be required or
used with the command
Category of the RFID command
P R O G R A M M I N G
38