Print Zones For 82.5Mm Paper; Rotated Printing Commands - CognitiveTPG A799 Programming Manual

Revision D 12/09

Print zones for 82.5mm paper

Specifications of print zone for 82.5 mm paper:
• 640 dots (addressable) @ 8 dots/mm, centered on 82.5mm
• Standard mode: minimum margins: 1.0mm (0.040 inches)
• Top margin to manual tear-off: 17.8mm (0.70 inches)
• Top margin to knife cut: 19.0mm (0.75 inches)

Rotated printing commands

Three commands control the rotation of printing. The table shows the combinations of set/cancel upside down print, set/
cancel rotated print (clockwise), and rotated print (counterclockwise).
Rotated clockwise and rotated counterclockwise print commands are mutually exclusive: the setting of the last received
command is effective. Unintended consequences may result when rotated clockwise is mixed with other commands.
The samples of the print show only the normal-size characters. Double-wide and double-high characters are printed in the
same orientation. They may also be mixed on the same line.
Upside down Rotated CW
(1B 7B n) (1B 56 n)
Canceled Canceled
Canceled Set
Set Canceled
Set Set
X X
Note: The following print modes cannot be mixed on the same line:
• Right-side up and upside-down
• Single-high (normal) and double-high
Rotated CCW Resulting output
(1B 12)
Cleared A B C
X
X
X
Set
A799-PG00001D
Chapter 3: Programming the Printer 27