Toyota Corolla E12-A Installation Instructions Manual page 27

Corolla (E12-A + E12-D)
REPEAT THE INSTRUCTIONS 1 TO 7 FOR THE LH-SIDE PARTS (FIG. 46 - 52)
10P
WIRE SIDE VIEW
red/black
23
Fig. 52
Fig. 53
Splicing Connector
Fig. 54
Corolla (RHD) - 27
7.
a) Remove the rubber weather seal
b) Route the tweeter wire harness
24
behind the rubber weather seal
RIGHT HAND SIDE
8. Locate and disconnect the 10P con-
nector in the kick panel area.
9. Turn the connector so that the wires
face you and the tab is on top.
Connect the red/black wire of the
tweeter to the third position from the
left side of the upper row (pos. 3).
The shape of the 10P connector can
be slightly different.
TOYOTA GENUINE AUDIO
24
24 .
NOTE
05-04
.
23