Programmable Features - Jeep Wrangler 2012 User Manual

ELECTRONICS

PROGRAMMABLE FEATURES

Electronic Vehicle Information Center (EVIC)
• The EVIC can be used to program the following Personal Settings. Press and release
the MENU button
to scroll through the settings. Press the SELECT button
setting.
• Language
• Auto UNLK On Exit
• RKE Unlock
• Sound Horn With RKE Lock
• Flash Lamp With Lock
• Headlamp Off Delay
• Headlamps With Wipers
• Key-Off Power Delay
Key Fob Programmable Features
• The following features may also be programmed by using the Key Fob transmitter or
the ignition switch and driver's door lock switch.
NOTE: Pressing the LOCK button while you are inside the vehicle will activate the
Vehicle Security Alarm. Opening a door with the Vehicle Security Alarm activated will
cause the alarm to sound. Press the UNLOCK button to deactivate the Vehicle Security
Alarm.
Flashing Lamps With Lock
• The turn signal lights flashing, when the doors are locked or unlocked, feature can
be turned on or off. To turn this feature on or off:
• Press and hold the UNLOCK button for at least 4 seconds, but no longer than
10 seconds. Then, press and hold the LOCK button while still holding the UNLOCK
button.
• Release both buttons at the same time.
68
until Personal Settings displays, then press the DOWN button
• Illumin Approach
• Hill Start Assist (HSA)
• Display Units of Measure In
• Nav – Turn by Turn
• Display Fuel Saver
• Compass Variance
• Calibrate Compass
to change the