Jeep Wrangler 2012 User Manual page 14

GETTING STARTED
Two-Door Model
• The tether strap should be attached to the tether anchor on the rear of the seatback
using the most direct path. For the outboard seating positions, route the tether
underneath the head rest and attach the hook to the tether anchor located on the
back of the seat.
Four-Door Model
Two-Door Model
12
• Loosen the child seat adjusters on the
lower straps and tether straps so that
you can attach the hook or connector
to the lower and tether anchorages
more easily.
• Attach the lower hooks or connectors
over the top of the anchorage bars,
pushing aside the seat cover material.
You will easily feel the anchorage bars if
you run your finger along the
intersection of the seatback and seat
cushion surfaces.
• Tighten all three straps as you push the
child restraint rearward and downward
into the seat.