Audio Menu - Mercedes-Benz COMAND Operator's Manual

Control unit
Hide thumbs Also See for COMAND:
Table of Contents

Advertisement

Lane recommen-
Meaning
dation display
Lane without lower
Uninterrupted lane
limit
Lane with lower limit
New lane during a
maneuver
Line with arrow
Lane recommend-
ed for the maneu-
ver
Navigation status indicators in the
multi-function display
When route guidance is activated, the fol-
lowing messages may appear:
< : you have reached the destination.
"Dest. area reached": you are ap-
proaching the destination. This mes-
sage appears, for example, with
relatively large special destinations.
"New route": the system is calculating
a new route, for example because you
have deviated from the previous route.
Route guidance is subsequently re-
sumed.
"Calculating route": a route is being cal-
culated, after which route guidance will
start.
"Off map": the vehicle is outside the
range of the digital map. The vehicle is
in an off-map position.
"Off mapped road": the vehicle is on a
road which is not in the digital map, or
is away from the road, for example in a
car park.
"No route": no route to the selected
destination could be calculated.

Audio menu

Use the functions in the Audio menu to op-
erate the audio equipment. If no audio
equipment is switched on, the multi-func-
tion display shows the message Audio Off.
To adjust the volume:
æ
ç
press the
or
Multifunction steering wheel
Selecting a radio station/channel
Switch on COMAND and select "FM/
AM Radio" (
(
page 47).
Select the Audio menu.
1 Wave band
2 Channel name or number
To select the next or previous pre-
set channel: briefly press % or
button.
$.
or
To select the next or previous chan-
nel: press and hold % or $.
i
You can only change the wave band and
save new stations/channels using COMAND.
At a glance
page 40) or "SatRadio"
27

Advertisement

Table of Contents
loading

Table of Contents