Navigation Within The Menu; Headphones - Mercedes-Benz Rear-Seat Entertainment System Manual

Controls in detail
10
Switch off the current screen and, if
X
applicable, pair the other screen with the
remote control. To do so, select the
remaining available button
the remote control.
Switching the remote control to the
desired screen
Switch on the desired screen.
X
Press button
X
control.
When operating screen
remote control lights up red; when
operating screen

Navigation within the menu

It is not possible to use the speller to
i
enter characters or numbers via the
remote control.
Touchscreen
Select the desired menu by briefly tapping
X
the touchscreen.
Slide the scroll bar slowly up or down to
X
scroll through lists.
Press button
i
the menu selection and return to the next
menu up.
Remote control
Briefly press button
X
navigate to the desired menu.
The selected menu is marked in color.
Press the
X
selection.
Press button
X
selection and return to the next menu up.
or
or on the remote
, the LED of the
it lights up green.
on the screen to leave
, , or
button to confirm the menu
to leave the menu

Headphones

WARNING
G
on
Make sure that the volume is set to
minimum on the screen before putting on
the headphones. Otherwise you could
damage your hearing.
Each screen can be connected with one set
®
of Bluetooth
as well as one set of cabled headphones via
the headphones jack.
®
Bluetooth
i
corded headphones are available in
specialist stores. Please observe the
notes in the manufacturer's instructions.
Pairing Bluetooth
speakers
Pairing cannot be carried out using the
i
remote control.
On Bluetooth
Activate Bluetooth
X
pairing mode on the headphones/
speakers; see the manufacturer's
operating instructions.
On the screen:
Activate Bluetooth
X
>
Turn Bluetooth On
The list of available Bluetooth
appears.
to
Select the desired Bluetooth
X
headphones/speakers from the list.
The symbol appears in the status bar
at the top right.
Unpairing Bluetooth
speakers
On the screen:
Select connected Bluetooth
X
headphones/speaker under
Pairing.
To unpair: Select Unpair.
X
headphones/speakers each
headphones/speakers and
®
headphones/
®
headphones/speakers:
®
and, if necessary,
®
: >
Settings
®
devices
®
®
headphones/
®
Settings
Pairing
>