Comand Display - Mercedes-Benz COMAND Operator's Manual

COMAND display

The currently selected function and the
associated menus are shown on the
COMAND display. The COMAND display is
divided into several areas.
1 Status line
2 Main functions
3 Main area
4 Submenus
The status line 1 displays the time and
the current telephone status.
You can change the main function using
the menu bar 2. The selection is made us-
ing the COMAND controller ( page 20).
In this example, the Audio main function is
set to the radio mode and the main area 3
is active.
i
The arrangement of the menus can vary, de-
pending on the equipment. The menus for the full
equipment version are shown in this guide.
At a glance
COMAND control system
Menu overview
Having selected a main function, you will
see the submenu at the bottom edge 4 of
the COMAND display.
Additional menus are available at the top
of the COMAND display 2 for the naviga-
tion, audio and telephone main functions
( page 16).
15