Storage Controllers; Sata Repeater; Perc 6/I; Table 12. Factory Raid Configurations - Dell PowerEdge M910 Technical Manual

Dell
#
0
1
2
3
4
5

12.6 Storage Controllers

Product Usage
SAS
PERC Internal
HBA
H200 Backplane
SAS/
Integrated Storage
SATA

12.6.1 SATA Repeater

The M910 does not support the SATA repeater. The only SATA drives supported by M910 are the SSD
drives which are only supported off the PERC solution.

12.6.2 PERC 6/i

For customers who want a hardware RAID solution, the PERC 6/i is available as an optional customer
kit. The PERC 6/i uses the LSI 1078 ROC (RAID on Chip) processor with a PCI Express host interface
and DDR2 memory. A battery is available with this card.
PowerEdge M910 Technical Guide
Table 12. Factory RAID Configurations
Hot- Min. Max.
Plug
Hard Hard
Drives Drives
No 0 0
No 1 2
No 2 2
Yes 2 2
No 2 2
Yes 2 2
Table 13. Supported Storage Controllers
M910 Slot
Yes,
Storage
Max
slot
1
Configuration Description
ZERO Diskless Configuration, No
daughtercard
ASSN SAS drives using SAS6/IR or
H200 daughtercard with no
RAID
ASSR0 SAS drives using the SAS6/IR or
H200 daughtercard with drives
in a RAID 0 mirror
ASSR1 SAS drives using the SAS6/IR or
H200 daughtercard with drives
in a RAID 1 Stripe
ASSCBR0 SAS or Solid State drives using
the PERC6 or H700
daughtercard (with battery)
with drives in a RAID 0 Stripe
ASSCBR1 SAS or Solid State drives using
the PERC6 or H700
daughtercard (with battery)
with drives in a RAID 1 mirror
PCIe PCI I/O
Con Bracket Con
x4
integrated
X4 No
mini SAS
wide
Battery
RAID Backup
0, 1, 10 No
34