Adjusting The Video - Pioneer Elite BDP-80FD Operating Instructions Manual

07
Setting
Angle Mark
PIP Mark
Secondary Audio Mark
®
DivX VOD DRM
Internet Setting
To restrict the viewing of web contents, etc., by children or others, select [Partial Permitted] or [Prohibited].
Disc Auto Playback
Last Memory
Use of a disk that does not support the function is not possible.
PBC (Play Back Control)
Setup Navigator
Change Password
Parental Control
Country Code
Screen Saver
Auto Power Off
Quick Start
Update
Load Default
System Information
BUDA
 Adjusting the video
Select and set Display Setting  Video Adjust.
1
Use / to select, then press ENTER.
2 Select Custom.
40
Use / to select, then press ENTER.
En
Options Explanation
Select this to display the angle mark on the TV screen (page 24).
On
Off Select this if you do not want to display the angle mark on the TV screen.
Select this to display the PIP mark on the TV screen.
On
Off Select this if you do not want to display the PIP mark on the TV screen.
Select this to display the secondary audio mark on the TV screen (page 28).
On
Off Select this if you do not want to display the secondary audio mark on the TV
screen.
Registration Code Displays the player's registration code required to play DivX VOD files
(page 11).
Web contents can be watched without entering the password.
Permitted
Partial Permitted The password must be entered to watch web contents.
Prohibited No web contents can be watched.
Discs are played automatically after they are loaded.
On
Off Loaded discs do not start playing automatically.
Select this to save the point at which you last stopped playback, even after the
On
disc tray is opened or you switch to the standby mode.
Off Select this when you want to use only Continue Viewing Play (page 29).
Select this to play Video-CDs (version 2.0) compatible with PBC using the
On
disc menu.
Off Select this to play Video-CDs (version 2.0) compatible with PBC without using
the disc menu.
Start making the settings using the Setup Navigator menu. For details, see page 21.
Register (change) the password for parental lock settings or for unlocking to play DVD-Videos with
the parental lock feature (page 42). The default password is "0000".
Change the player's parental lock level (page 42).
Change the Country/Area code (page 42).
Off The screen saver is not activated.
・The screen saver will be activated if no operation has been performed for
1 min
more than one minute/two minutes/three minutes.
2 min
・During operation of the screen saver, [SCNSVR] is displayed on the front
3 min
panel display.
・Operating the remote control can deactivate the screen saver.
Select this if you do not want the power to turn off automatically.
Off
10 min The power will be automatically turned off if no operation has been performed
for more than 10 minutes/20 minutes/30 minutes.
20 min
30 min
On Select to shorten the required time to boot up.
Select to perform normal bootup.
Off
USB Storage Select the method of software updating (page 43).
Network
Restore the settings to the factory default.
Check the system version number.
BUDA Information Display and set up the BUDA data on the connected USB device (page 42).
BUDA Setup
3 Select the item and change the setting.
Use / to select the item, then use / to change the
setting. Once the setting is completed, press
RETURN to close the settings screen.