Adjusting The Video - Pioneer BDP-450 Operating Instructions Manual

Setting
07
Screen Saver
Auto Power Off
Quick Start
Update
Load Default
System Information
Disc Auto Update
BUDA

Adjusting the video

1 Select and set Display Setting
to select, then press ENTER.
Use /
2 Select and set Custom (BDP-450) or Next Screen
(BDP-150).
Use / to select, then press ENTER.
3 Select the item and change the setting.
Use / to select the item, then use
setting. Once the setting is completed, press
RETURN to close the settings screen.
List of BDP-450 setting items
Item
Prog.Motion
Pure Cinema
Brightness
Contrast
Hue
Saturation
Detail
YNR
44
En
Options
Off
1 min
2 min
3 min
Off
10 min
20 min
30 min
On
Off
Disc
USB Storage
Network
Restore the settings to the factory default.
Check the system version number.
On
Off
BUDA Information
BUDA Setup
Video Adjust.
/ to change the
Description
Adjust according to the type of image
(moving or still image). This is effective
mainly when outputting video materials
as progressive images.
This setting optimizes the operation of
the progressive scanning circuit for
playing film materials.
Select this to adjust the TV screen's
brightness.
Select this to adjust the TV screen's
contrast.
Adjusts the balance between green and
red.
Select this to adjust the TV screen's
saturation.
Adjusts the picture's contours.
Reduces noise in the luminance (Y)
signal.
Explanation
The screen saver is not activated.
The screen saver will be activated if no operation has been performed for
more than one minute/two minutes/three minutes. Operating the remote
control can deactivate the screen saver.
Select this if you do not want the power to turn off automatically. This is the
default setting for models other than European models.
The power will be automatically turned off if no operation has been performed
for more than 10 minutes/20 minutes/30 minutes. The default setting for
European models is 30 minutes.
Select to shorten the required time to boot up.
Select to perform normal bootup.
Select the method of software updating. (page 46)
Display the software update screen when the disc with the player's update
file is loaded.
The software update screen must be displayed manually. (page 46)
Display and set up the BUDA data on the connected USB device.
Item
CNR
MNR
BNR
List of BDP-150 setting items
Item
Brightness
Contrast
Hue
Saturation
Note
• For the BDP-450, the Video Adjust settings do not
affect Blu-ray 3D pictures or the pictures of the HDMI
OUT (SUB) terminals.
Description
Reduces noise in the chroma (C) signal.
Reduces the mosquito noise (distortion
along the contours of the picture
generated upon MPEG compression).
Reduces the block noise (block-shaped
distortion generated upon MPEG
compression).
Description
Select this to adjust the TV screen's
brightness.
Select this to adjust the TV screen's
contrast.
Select this to adjust the color (green and
red) balance of the TV screen.
Select this to adjust the TV screen's
saturation.