Adjusting The Video - Pioneer BDP-140 Operating Instructions Manual

Adjusting the video

07
1 Select and set Display Setting
Next Screen.
Use / to select, then press ENTER.
2 Select the item and change the setting.
Use / to select the item, then use
setting. Once the setting is completed, press
RETURN to close the settings screen.
List of BDP-LX55 setting items
Item
Prog.Motion
Pure Cinema
Black level
White level
Hue
Chroma Level
Detail
YNR
CNR
MNR
BNR
List of BDP-440/BDP-140 setting items
Item
Brightness
Contrast
Hue
Saturation
Note
• For the BDP-LX55, the Video Adjust setting does not
affect the video signals of the VIDEO OUTPUT
terminals.
44
En
Video Adjust
/ to change the
Description
Adjust according to the type of image
(moving or still image). This is effective
mainly when outputting video materials
as progressive images.
This setting optimizes the operation of
the progressive scanning circuit for
playing film materials.
Adjusts the level of the black portions.
Adjusts the level of the white portions.
Adjusts the balance between green and
red.
Adjusts the density of the colors.
Adjusts the picture's contours.
Reduces noise in the luminance (Y)
signal.
Reduces noise in the chroma (C) signal.
Reduces the mosquito noise (distortion
along the contours of the picture
generated upon MPEG compression).
Reduces the block noise (block-shaped
distortion generated upon MPEG
compression).
Description
Select this to adjust the TV screen's
brightness.
Select this to adjust the TV screen's
contrast.
Select this to adjust the color (green and
red) balance of the TV screen.
Select this to adjust the TV screen's
saturation.
Setting the IP address
1 Select and set Network
Screen.
Use / to select, then press ENTER.
2 Set IP address.
Use / / / to set the IP address of the player or DNS
server, then press ENTER.
• Auto Set IP Address
On – The player's IP address is obtained
automatically. Select this when using a broadband
router or broadband modem that has a DHCP
(Dynamic Host Configuration Protocol) server
function. This player's IP address will automatically
be allocated from the DHCP server.
Off – The player's IP address must be set manually.
Use the number buttons (0 to 9) to input the IP
address, subnet mask and default gateway.
Note
• For information on the DHCP server function, refer to
the operating instructions for the network device.
• You may need to contact your Internet service
provider or network administrator when inputting the
IP address manually.
Setting the proxy server
Only set the proxy server if so instructed by your Internet
service provider.
1 Select and set Network
Screen.
Use / to select, then press ENTER.
2 Select and set Use or Not use at Proxy Server.
Use / to change, then press
• Use – Select this when using a proxy server.
• Not use – Select this when not using a proxy server.
If you have selected Use, proceed to step 3.
3 Select and set Server Select Method.
Use / to change, then press
• IP Address – Input the IP address.
• Server Name – Input the server name.
IP setting Next
Proxy Server Next
.
.