Advanced Settings; Changing The Settings; Operating The Initial Setup Screen - Pioneer Elite BDP-80FD Operating Instructions Manual

Chapter 7

Advanced settings

Changing the settings

Operating the Initial Setup
screen
1 When playback is stopped, display the Home
Menu screen.
Press
HOME MENU.
Note
• The items that can be selected depend on the player's status.
• In Options, the factory default settings are indicated in bold.
Setting
TV Screen
Video Adjust
Noise Reduction
Options Explanation
16:9 Full Select this when connecting to a wide (16:9) TV.
Select this when connected to a wide (16:9) TV. 4:3 pictures are displayed
16:9 Normal
with vertical black bars along the sides.
4:3 Pan&Scan Select this when connecting to a 4:3 screen TV and playing a 16:9 video. The
video will be played with the left and right sides of the image cut off to display
on the 4:3 screen. (This function works if the disc is labeled for 4:3PS.)
4:3 Letterbox Select this when connecting to a 4:3 screen TV and playing a 16:9 video. The
video will be played with black bands at the top and bottom.
Choose the video output mode.
Standard
Vivid
Cinema
Custom The quality of the playback picture can be adjusted according to the TV you
are using (page 40).
Choose the level of noise reduction.
0
1
2
3
2 Select and set Initial Setup.
Use / to select, then press ENTER.
3 Select the item and change the setting.
Use /// to select, then press ENTER.
 Closing the Initial Setup screen
Press HOME MENU or
RETURN.
07
37
En