Adam Tensor Beta Operation Manual page 8

3. Unpacking / Setup
g) If you wish to use the plates, put them on the floor according to the desired posi-
tion of the loudspeaker. Using the plates is strongly recommended whenever the
spikes might damage the surface of the floor.
h) Pick up the bass unit and place it on the desired spot. Please make sure that it is
standing solidly!
i)
Take three of the six sandbags and put it into the recesses on the top of the bass
unit. The sandbags should be evenly spread and flattened if necessary.
j) Take the upper (tweeter/midrange) unit out of the box and place it centered on the
bass unit respectively on the overlying sandbags. Please ensure that the upper
unit stands steady and firm on the base!
k) Repeat instructions to assemble the second loudspeaker in the same manner.
8