Raising Or Lowering The Bass Section; Led Dim - Adam Tensor Beta Operation Manual

6. Speaker Adjustment
6.6

Raising or lowering the bass section

If you wish to either raise or lower the bass frequencies, the parametric
equalizer is the best tool.
For a moderate bass boost the following settings are recommended:
• 'Gain' +3dB
• 'Q' -0.5
• 'Freq.' 40Hz.
For a lowering of the bass section these settings are recommended:
• 'Gain' -3dB
• 'Q' -0.5
• 'Freq.' 40Hz.
Please note: 'Gain' is the parameter that controls how much effect the
settings of the parametric EQ have on the overall sound.
6.7

LED Dim

The LED glows during operation. To dim the LED, please use
the LED Dim-button on the control panel. If the button is
switched on, only the logo and the stand-by button will glow
slightly, the writing will not glow.
Tensor Beta (Active Version) Manual
moderate boost of low frequencies
moderate lowering of the bass frequencies
/ english
15