Basic Settings - Rehau STAR 20 Installation Manuallines

Star series
Hide thumbs Also See for STAR 20:
Table of Contents

Advertisement

Program - Menu
To enter the program menu, you have to press
following procedures.
Program Menu
To access the program menu,
open the hatch and press select
and cancel at the same time for
three seconds.
Profi le
Enter the Profi le menu to adjust the detailed settings of the Family,
Single, Offi ce, Name 1 and Name 2 Profi les
You can adjust the profi les to your needs, by varying the 6 daytimes
and allocate them new temperature zones. This can be done for a
single day or weekday and weekend. You can rename profi les and
copy settings inside a profi le and from one profi le to another. In the
following table, you can fi nd the factory defaulted settings.
Daytimes
Mon-Fri
Early Morning
Morning
Noon
Afternoon
Evening
Night
Sat-Sun
Early Morning
Morning
Noon
Afternoon
Evening
Night
+
or
fi rst before the

Basic Settings

Enter the Basic Settings menu to
adjust Date/Time, Language and
Maintenance settings.
Time
Family
06:00 – 08:00
Comfort
08:00 – 12:00
Standard
12:00 – 14:00
Comfort
14:00 – 18:00
Standard
18:00 – 23:00
Comfort
23:00 – 06:00
Reduced
06:00 – 08:00
Comfort
08:00 – 12:00
Standard
12:00 – 14:00
Comfort
14:00 – 18:00
Standard
18:00 – 23:00
Comfort
23:00 – 06:00
Reduced
Temp. Zones
Enter the Temp. zones Menu to
adjust the temperatures of the
comfort, standard and reduced
zones. The three temperature
zones can be allocated to the six
day times.
Heat
Enter the Heat Menu to activate
heat of controller.
Single
Offi ce
Comfort
Comfort
Standard
Standard
Comfort
Comfort
Standard
Standard
Comfort
Comfort
Reduced
Reduced
Comfort
Comfort
Standard
Standard
Comfort
Comfort
Standard
Standard
Comfort
Comfort
Reduced
Reduced
If you modify a temperature zone, the
temperature settings within the profi les
will change as well. The zones are factory
defaulted with these temperatures.
Comfort 24°C
Standard 20°C
Reduced 16°C
Control
Enter the Control menu to
male changes on the Span,
Setback, Frost* Output and Valve
Protection (VP)
* Controller serves as protection against frost and
prevents temperature from going below 5°C
Name 1
Name 2
Comfort
Comfort
Standard
Standard
Comfort
Comfort
Standard
Standard
Comfort
Comfort
Reduced
Reduced
Comfort
Comfort
Standard
Standard
Comfort
Comfort
Standard
Standard
Comfort
Comfort
Reduced
Reduced
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Star 30Star 50

Table of Contents