Electrical Installation - Rehau STAR 20 Installation Manuallines

Star series
Hide thumbs Also See for STAR 20:
Table of Contents

Advertisement

REHAU STAR CONTROLS INSTALLATION

ELECTRICAL INSTALLATION

N
Purpose and Correct Use
The standalone mounted electronic device settings as a temperature
control system only in dry and closed living and offi ce spaces. This
controller may be opened, installed or repaired only by qualifi ed
electricians. These professionals must observe existing standards and
regulations.
Clean device only with a dry and soft cloth. Do not use solvents
or aggressive cleaning agents! The manufacturer accepts no
responsibility for damage caused by non-observance of these
instructions.
Installation of controllers
The electrical installation must be carried out in accordance to the
current wiring regulations in force and must be in accordance with the
connection plan. Only approved certifi ed professionals may carry out
the installation. Further more the installation is always to be carried
out with the power supply disconnected.
Position the room unit such that it is not covered by curtains, pieces of
furniture or other objects. The control should not be installed close
to heat sources (i.e. lamps, fi replaces/chimneys, direct sunlight etc.)
and positioned away from draughts. Ensure that it is fi tted on a fl at,
solid surface that is non-conductive between 1.2-1.5m off the ground
fl oor. This allows the room temperature to be measured at the correct
height and results in more comfortable control.
Wall mounting
Before mounting the wall unit, take-off the housing cover from the
base plate.
- 1. Remove the screw on the underside
- 2. Open the housing by lifting the housing cover on the bottom edge
and then lifting it.
Now fi rmly mount the base plate on the wall or the fl ush-mounted
socket with the screws provided.
REHAU STAR 20 & 30 Jumpers
Switch
Feature
VP
Valve protection feature
PWM
Pulse-Width-Modulation
Temperature reduction
8.
8.1
Changing the Batteries in
STAR 50
2 x AA batteries
With version AC 230 V have
batteries changed only be a
professional electrician.
ON
OFF
23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Star 30Star 50

Table of Contents