Star Centre - Rehau STAR 20 Installation Manuallines

4.
4.5
Technical Data
Article No:
Operating Voltage:
Circuit voltage:
Dimensions H/W/L in mm:
Safety fuse:
Max. no. of controllers:
Max. no. of actuators:
Flexible cable:
Solid Cable:
Ambient temperature:
Storage temperature:
Relative air humidity:
Type of safety cut-out:
Protection rating:
14
REHAU STAR TECHNICAL DATA

STAR CENTRE

Wiring Centre
This is a specifi cally designed wiring centre interface that is used
primarily in the control of underfl oor heating. Its inbuilt logic distributes
the Night set back and time signal specifi cally to the controller,
actuators and if installed the boiler/pump logic module. It can connect
up to six various combinations of controllers. On the output side each
zone can have a maximum of four actuators allowing in total the
facility of twenty four thermal actuators.
General
The wiring centre has an unique system of terminations and are easily
pushed into the appropriate terminals using the insertion tool supplied
with the unit.
Wiring Centre
205578
230V AC
230V AC, 5 A
64 x 86.5 x 304
T2A
up to 6
up to 24
1.0 - 1.5 mm 2
0.5 - 1.5 mm 2
0°C to 50°C
-25°C to 60°C
max 95% non condensing
II
IP20