Table of Contents
Advertisement
s e c t i o n 1
I N T R O D U C T I O N
Thank you for purchasing the Martin RoboScan Pro 518 moving-mirror intelligent projec-
tor. It is designed, built, and programmed to be bright, reliable, safe and easy to use. With
proper setup and maintenance, the RoboScan Pro 518 will provide years of trouble-free
operation.
This manual covers the RoboScan Pro 518 with software version 6.4. The latest information
on the RoboScan Pro 518 is always available from your dealer and the Martin web site at
http://www.martin.dk.
R o b o S c a n P r o 5 1 8 S a f e t y I n f o r m a t i o n
This product is for professional use only. It is not for household use.
This product presents risks of lethal or severe injury due to fire and heat, electric shock, ultra-
violet radiation, lamp explosion, and falls. Read this manual before powering or installing the
fixture, follow the safety precautions listed below and observe all warnings in this manual and
printed on the fixture. If you have questions about how to operate the fixture safely, please con-
tact your Martin dealer or call the Martin 24-hour service hotline at +45 70 200 201.
To p r o t e c t y o u r s e l f a n d o t h e r s f r o m e l e c t r i c s h o c k
•
Disconnect the fixture from AC power before removing or installing the lamp, fuses,
or any part, and when not in use.
•
Always ground (earth) the fixture electrically.
•
Use only a source of AC power that complies with local building and electrical codes
and has both overload and ground-fault protection.
•
Do not expose the fixture to rain or moisture.
•
Refer any service operation not described in this manual to a qualified technician.
To p r o t e c t y o u r s e l f a n d o t h e r s f r o m U V r a d i a t i o n a n d
l a m p e x p l o s i o n
•
Never operate the fixture with missing or damaged lenses and/or covers.
•
When replacing the lamp, allow the fixture to cool for at least 5 minutes before open-
ing the fixture or removing the lamp. Protect your hands and eyes with gloves and
safety glasses.
•
Do not stare directly into the light. Never look at an exposed lamp while it is lit.
•
Replace the lamp if it becomes defective or worn out.
4
W A R N I N G !
RoboScan Pro 518
Hide quick links:
Advertisement
Table of Contents
