Ego 03; Safety Information - Martin Ego 01 User Manual

E G O 0 3
The Ego 03 is a kaleidoscopic effect with a range of gobo and color
combinations on a single effect wheel that are projected onto a series of
mirrored tunnels. In addition to variable behavior tuning, effect wheel and
mirrored-tunnel rotation speeds are controllable.
S A F E T Y I N F O R M A T I O N
Warning! This product is not for household use. It presents risks of
lethal or severe injury due to fire and heat, electric shock, and
falls.
Read this manual before powering or installing the fixture, follow the
safety precautions listed below and observe all warnings in this manual
and printed on the fixture. If you have questions about how to operate the
fixture safely, please contact a Martin distributor for assistance. Refer any
service operation not described in this manual to a qualified technician.
Do not modify the fixture or install other than genuine Martin accessories
and upgrade kits.
Avoi di ng electric shocks
• Disconnect the fixture from AC power before removing or installing the
lamp, fuses, or any part, and when not in use.
• Always ground (earth) the fixture electrically.
• Use only a source of AC power that complies with local building and
electrical codes and has both overload and ground-fault protection.
• Do not expose the fixture to rain or moisture.
• Refer all service to a qualified technician.
• Never operate the fixture with missing or damaged lenses and/or covers.
Protecting yourself and others from burns an d fire
• Never attempt to bypass the thermostatic switch or fuses. Always replace
defective fuses with ones of the specified type and rating.
• Ensure that the air flow through fans and vents is free and unobstructed.
• Keep all combustible materials (for example fabric, wood, paper) at least
0.1 meters (4 inches) away from the fixture. Keep flammable materials
well away from the fixture.
• Do not illuminate surfaces within 0.3 meters (12 inches) of the fixture.
Introduction 5