Installing Climate Controller; Preparing The Installation; Opening The Climate Controller; Wall-Mounting The Climate Controller - Uponor C-46 Installation And Operation Manual

5 Installing Climate Controller C-46
5.1

Preparing the installation

Follow the guidelines below to determine the best installation
position:
1. Study the connection diagrams of the Climate Controller
C-46, see section 5.4 Connecting the Climate Controller C-
46, page 14.
2. Ensure that AC power is available for connection of the
Climate Controller C-46.
3. Ensure that the installation position is free from running and
dripping water.
4. Ensure that there is no risk for overheating of the Climate
Controller C-46 due to high ambient temperature.
5. Select a mounting position on a vertical surface at a height
that is convenient for operation of the Climate Controller
C-46.
5.2 Opening the Climate Controller C-46
To open the Climate Controller C-46:
1. Carefully lift the cover, starting at the upper edge.
2. Loosen the captive screw which fixes the upper compartment
to the lower.
3. Lift the upper compartment to reach the signal cable
connected between the upper and lower compartments.
4. Disconnect the signal cable from the lower compartment.
Pos. Item
1 Cover
2 Upper compartment
3 Lower compartment
4 Fixing screw
5 Interconnection signal cable
6 Fuse T 5 A/250 V and spare fuse
CLIMATE CONTROLLER C-46 - INSTALLATION AND OPERATION MANUAL
5.3

Wall-mounting the Climate Controller

C-46
The Climate Controller C-46 is delivered in a kit including screws
and wall plugs. The figure below shows the Climate Controller
C-46 dimensions and the mounting hole positions.
13