Table of Contents
Advertisement
computer although it can also be made to happen in Windows by
using the DOS commands 'ipconfig release' then 'ipconfig renew'.
4.2
Setting the Automatic Disconnect
The
automatic
communications session if no uplink activity (internet requests) is
detected for the period specified. This is a safety device that is
especially important if you are using a circuit switched uplink
channel. Please note that some computer programmes, software and
web pages may automatically send internet requests which could
keep the session activated.
You can edit the "Inactivity timeout" for each uplink setting through
the User Interface as follows:
1.
Click on the "SETTINGS" tab and then the "UPLINK" tab.
2.
From the "Edit connection:" drop-down menu select the uplink
connection that you wish to edit.
3.
Enter the inactivity timeout period in seconds.
4.
Once the period has been entered click on "SAVE
CHANGES".
Note that "GPRS Preset" connections do not allow setting of a
timeout. A timeout can be selected with manually configured GPRS
connection settings.
4. SBS Functions
disconnect
function
Page 12
will
terminate
your
Advertisement
Table of Contents
