Table of Contents
Advertisement
4.
Once all settings have been correctly entered click on "SAVE
CHANGES".
Now this uplink setting can be selected from the "Uplink" menu on
the CONNECT page.
If you use an uplink such as analogue modem, GSM modem or
GPRS modem that requires an internet service provider (ISP) you
may need to enter the phone number, username and password for
your account with the ISP.
If you use a DSL modem or wireless router (whilst in port) for the
uplink the IP number box should show the IP address of the router on
your LAN.
X.
Adding a New Uplink Connection
There may be occasions when you may wish to add another
communications device to be used for the uplink. The SBS can be
connected to a maximum of three different uplink devices
simultaneously, although only one can be used at any one time.
To add a new uplink from the User Interface:
1.
Click on the "SETTINGS" tab
and then the "UPLINK" tab.
2.
From the "Edit connection:"
drop-down menu select "Add
a new uplink".
3.
Select
the
"Connection Type" from the
drop-down
complete
necessary. See 4.2 above for
a description of the fields.
4.
Once all settings have been
correctly entered click on
"SAVE CHANGES".
most
suitable
menu
then
the
fields
as
Using GPRS Preset:
GPRS
Preset
allows
GPRS uplink connection to be
automatically configured on
the basis of the type of phone
and identity of the network
operator without needing the
Init String information.
Select 'Connection type' as
'GPRS Preset' and complete
the fields. Should you not find
the relevant phone try a
similar make of phone or else
the Siemens M55. There is no
inactivity timeout setting with
this preset.
the
Advertisement
Table of Contents
