Omega Altise OAPC1213 User Manual page 6

AIR-CONDITIONING SEMI-PERMANENT INSTALLATION
If required, your appliance can also be installed semi-permanently (fig.E)
Drill a hole ( 134 mm) in an outside wall or through a window pane. Respect the dimensions and
height of the hole given in figure F and G.
Fit the wall flange [10] into the hole.
Fit the air exhaust hose in the relevant hose located on the rear side of the appliance. (fig. A page 4).
Fit the end of the hose to the wall flange [10] as shown in fig.G.
_ PREPARING FOR USE
_
In the
In the wooden
window
kickboard of a
pane
French window
In the wall: you are recommended to
insulate the section of wall using suitable
insulation.
NOTE: When installing the air conditioner semi-permanently,
you should leave a door slightly open (as little as 1 cm) to
guarantee correct ventilation.
Keep the air hose as short and free of
curves as possible to avoid constrictions.
6
__