Preparing For Use; Electrical Connections; Air-Conditioning Without Installation - Omega Altise OAPC1213 User Manual

_

PREPARING FOR USE

__
_

ELECTRICAL CONNECTIONS

Before plugging the appliance into the mains socket, please check:
•The mains power supply corresponds to the value indicated on the rating plate on the back of the
appliance;
•The mains socket and electrical circuit are adequate for the appliance;
The instructions below will enable you to prepare your air conditioner for operation as efficiently as
possible. Before use, make sure the air Intake and outlet grills are not obstructed.

AIR-CONDITIONING WITHOUT INSTALLATION

1. Fit the air exhaust hose [12] in the housing
[7] at the back of the appliance. Insert it as shown in figure A.
For optimum results:
If you have a sash window, place the bracket [16] on the window sill
extend the bracket fully within the window frame, fix the bracket
by using the pin then lower the window onto the bracket.
Insert the window outlet [13] of the exhaust hose [12] into the
slot, then connect the hose to the air conditioner (fig. B).
4