Setting The Timer - Omega Altise OAPC1213 User Manual

SETTING THE TIMER

The timer can be used to delay appliance start up or shut down. This avoids wasting electricity by
optimising operating periods.
How to programme delayed shutdown
• With the air-conditioning unit on, press the TIMER button 4. The time is displayed and the "h"
symbol flashes, with a flashing arrow indicating TIMER OFF.
• Set the time when you want the appliance to go off using the
24 hours).
During the first ten hours, you can select half hour intervals. For times greater than ten hours, one
hour intervals can be selected.
• Press the TIMER button again to confirm the selection. The appliance emits a beep and the
light (H) flashes on the control panel, confirming successful activation of the timer. A count- down of
the time left is displayed on the remote control display and the light (H) flashes on the air
conditioner display.
• At the end of the set time the appliance switches off automatically.
• To cancel the timer programme, press the TIMER button again. The appliance emits a beep and both
displays reset to display the settings prior to activation of the timer.
How to programme delayed start up
• With the air conditioner off, press the TIMER button. An arrow indicating TIMER ON flashes on the
display. Now make all the desired settings for when the appliance will switch on (operating mode,
fan speed and temperature). Confirm the settings by pressing the TIMER button. The time is
displayed and the "h" symbol flashes.
Set the time when you want the appliance to switch off using the button
24 hours).
During the first ten hours, you can select half hour intervals. For times greater than ten hours, one
hour intervals can be selected.
• Press the TIMER button again to confirm the start-up time. A beep sounds and the time set is also
displayed on the control panel, confirming setting of the timer. The light (H) flashes on the air
conditioner display. A countdown of the time left is displayed on both displays.
• At the end of the set time the appliance switches on automatically, with the settings made
previously.
• To cancel the timer programme, press the TIMER button again. The appliance emits a beep and both
displays reset to stand-by.
_ USING THE REMOTE CONTROL
_
11
_
buttons (from 30 minutes to
(from 30 minutes to