Setting Time Data - Sony XDCAM PXW-X70 Operating Manual

Useful functions (Continued)
To copy the picture profile setting to
another picture profile number
See page 53 for the location of the buttons.
1 Press the ASSIGN3 button A.
2 Press the v/V/b/B/EXEC button B,
select the picture profile number that
you want to copy from, then press the
button again.
3 Press the v/V/b/B/EXEC button B,
then select [SETTING] t [COPY].
4 Press the v/V/b/B/EXEC button B,
select the picture profile number that
you want to copy to, then press the
button again.
5 Press the v/V/b/B/EXEC button B,
then select [YES] t [RETURN] t
[OK].
To reset the picture profile settings
You can reset the picture profile settings by
each picture profile number. You cannot
reset all picture profile settings at once.
See page 53 for the location of the buttons.
1 Press the ASSIGN3 button A.
2 Press the v/V/b/B/EXEC button B,
select the picture profile number that
you want to reset, then press the button
again.
3 Press the v/V/b/B/EXEC button B,
then select [SETTING] t [RESET] t
[YES] t

Setting time data

The camcorder records movies
accompanied by time data, such as time
code and user bit.
Presetting the time code
1 Press the MENU button, press the v/V/
b/B/EXEC button and select
UB SET) t [TC PRESET], then press
the button again.
60
[RETURN] t [OK].
(TC/
2 Press the v/V/b/B/EXEC button, select
[PRESET], then press the button again.
3 Press the v/V/b/B/EXEC button, select
the first two digits, then press the button
again.
You can set the time code within the
following range.
When [60i] is selected:
00:00:00:00 - 23:59:59:29
• When setting 24p, you can set the last
2 time code digits of the frames in
multiples of 4, between 0 and 23.
When [50i] is selected:
00:00:00:00 - 23:59:59:24
4 Set other digits by repeating step 3.
5 Press the v/V/b/B/EXEC button, select
[OK], then press the button again.
To reset the time code
You can reset the time code (00:00:00:00).
Select [RESET] in step 2 of "Presetting
the time code."
To reset the time code using the
Wireless Remote Commander
You can reset the time code (00:00:00:00)
also by pressing the TC RESET button on
the Wireless Remote Commander.
Presetting the user bit
1 Press the MENU button, press the v/V/
b/B/EXEC button and select
UB SET) t [UB PRESET], then press
the button again.
2 Press the v/V/b/B/EXEC button, select
[PRESET], then press the button again.
3 Press the v/V/b/B/EXEC button, select
the first two digits, then press the button
again.
4 Set other digits by repeating step 3.
5 Press the v/V/b/B/EXEC button, select
[OK], then press the button again.
(TC/