Sony XDCAM PXW-X70 Operating Manual page 112

Warning indicators and messages (Continued)
-
pertaining to the write-protect of the
memory card)*
• The write-protect switch is set to lock
position on the memory card.
• Access to the memory card was
restricted on another device.
* When [BEEP] is set to [ON] (p. 101), you hear a
melody when the warning indicators appear on
the LCD screen.
Description of warning messages
If messages appear on the LCD screen or in
the viewfinder, follow the instructions.
Recording media
Inconsistencies found in image
database file. Do you want to repair
the image database file?
Inconsistencies found in image
database file. Cannot record or play
HD movies. Do you want to repair the
image database file?
• You cannot record or play back movies
because no movie management
information exists. If you touch [OK],
new management information is
created and you can record or play back
movies.
Inconsistencies found in the image
database file. Back up and recover.
Recover, then import using the
included PC software.
• Inconsistencies occur in the image
database file because movie
management information is damaged.
If you touch [OK], new management
information is created by backing up a
movie. The backed up movies cannot
be recognized. If you connect to a
computer that has been installed with
the software "Content Browser," you
can copy the backed up movies.
112
- (Warning indicator Buffer overflow. Writing to the media
was not completed in time.
• You have performed recording and
erasing operations repeatedly, or a
memory card that has been formatted
by other device is used. Copy and take
data backup to other device (such as a
computer), and then [Empty] the
memory card on the camcorder (p. 79).
• The size of the inserted memory card is
not sufficient for copying the movie(s).
Use the recommended memory card
(p. 27).
Recovering data.
• Your camcorder tries to recover data
automatically if the data writing was
not performed properly.
Cannot recover data.
• Writing data onto the media of the
camcorder has failed. Attempts were
made to recover the data, but they were
unsuccessful.
Reinsert the memory card.
• Reinsert the memory card a few times.
If even then the indicator flashes, the
memory card could be damaged. Try
with another memory card.
Cannot recognize this
memory card. Format and use again.
• Format the memory card (p. 78). Note
that if you format the memory card, all
the recorded movies and photos are
deleted.