Setting Time Data - Sony nxcam HXR-NX3E Operating Manual

To copy the picture profile setting to
another picture profile number
See page 53 for the location of the buttons.
1 Press the PICTURE PROFILE button
B.
2 Select the picture profile number that
you want to copy from with the SEL/
PUSH EXEC dial A, then press the
dial.
3 Select [SETTING] t [COPY] with the
SEL/PUSH EXEC dial A, then press
the dial.
4 Select the number of the picture profile
that you want to copy to with the SEL/
PUSH EXEC dial A, then press the
dial.
5 Select [YES] t [
[OK] with the SEL/PUSH EXEC dial
A.
To reset the picture profile settings
You can reset the picture profile settings by
each picture profile number. You cannot
reset all picture profile settings at once.
See page 53 for the location of the buttons.
1 Press the PICTURE PROFILE button
B.
2 Select the picture profile number that
you want to reset with the SEL/PUSH
EXEC dial A, then press the dial.
3 Select [SETTING] t [RESET] t
[YES] t [ RETURN] t [OK]
with the SEL/PUSH EXEC dial A.

Setting time data

The camcorder records movies
accompanied by time data, such as time
code and user bit.
RETURN] t
Presetting the time code
1 Press the MENU button, select
(TC/UB SET) t [TC PRESET]
with the SEL/PUSH EXEC dial, then
press the dial.
2 Select [PRESET] with the SEL/PUSH
EXEC dial, then press the dial.
3 Select the first 2 digits with the SEL/
PUSH EXEC dial, then press the dial.
You can set the time code within the
following range.
NTSC model:
00:00:00:00 - 23:59:59:29
• When setting 24p, you can set the last
2 time code digits of the frames in
multiples of 4, between 0 and 23.
PAL model:
00:00:00:00 - 23:59:59:24
4 Set other digits by repeating step 3.
5 Select [OK] with the SEL/PUSH EXEC
dial, then press the dial.
To reset the time code
You can reset the time code (00:00:00:00).
Select [RESET] in step 2 of "Presetting
the time code."
To reset the time code using the
Wireless Remote Commander
You can reset the time code (00:00:00:00)
also by pressing the TC RESET button on
the Wireless Remote Commander.
Presetting the user bit
1 Press the MENU button, select
(TC/UB SET) t [UB PRESET] with
the SEL/PUSH EXEC dial, then press
the dial.
2 Select [PRESET] with the SEL/PUSH
EXEC dial, then press the dial.
3 Select the first 2 digits with the SEL/
PUSH EXEC dial, then press the dial.
4 Set other digits by repeating step 3.
59
Continued ,