Setting Time Data - Sony PXW-FS5M2 Operating Manual

Useful functions (continued)
S-LOG3t709(800%): Converts
S-LOG3 to ITU-709(800%) equivalent
for display.
b Note
• If [AUTO] is selected for playback, the video is
converted for display according to the gamma
settings in [PICTURE PROFILE], not the
gamma setting (S-LOG2/S-LOG3) of the
playback video.
z Tip
• You can assign this function to an ASSIGN
button (p. 85).

Setting time data

The camcorder records movies
accompanied by time data, such as time
code and user bit.
Setting the time code
1 Press the MENU button and select
(TC/UB SET) t [TC PRESET] with
the SEL/SET dial, then press the dial.
2 Select [PRESET] with the SEL/SET
dial, then press the dial.
3 Select the first 2 digits with the SEL/
SET dial, then press the dial. You can
set the time code within the following
range.
When [60i] is selected:
00:00:00:00 to 23:59:59:29
• When setting 24p, you can set the last 2 time
digits to 00, 02, 08, 12, 16, or 20.
When [50i] is selected:
00:00:00:00 to 23:59:59:24
4 Set other digits by repeating step 3.
5 Select [OK] with the SEL/SET dial,
then press the dial.
112
To reset the time code
Select [RESET] in step 2 of "Setting the
time code" above to reset the time code
(00:00:00:00).
To reset the time code using the
Wireless Remote Commander
Press the TC RESET button on the Wireless
Remote Commander to reset the time code
(00:00:00:00).
Setting the user bits
1 Press the MENU button and select
(TC/UB SET) t [UB PRESET] with
the SEL/SET dial, then press the dial.
2 Select [PRESET] with the SEL/SET
dial, then press the dial.
3 Select the first 2 digits with the SEL/
SET dial, then press the dial.
4 Set other digits by repeating step 3.
5 Select [OK] with the SEL/SET dial,
then press the dial.
To reset the user bits
Select [RESET] in step 2 of "Setting the
user bits" above to reset the user bits (00 00
00 00).