Sony XDCAM PXW-X70 Operating Manual page 44

Audio setup (Continued)
External audio input jacks
A: INPUT1 jack
B: INPUT2 jack
Audio source switches
D: INPUT1 (LINE/MIC/MIC+48V)
switch
F: INPUT2 (LINE/MIC/MIC+48V)
switch
Audio source level controls
C: ATT (INPUT1) switch
E: ATT (INPUT2) switch
Recording channel switch
H: REC CH SELECT (INPUT1) switch
44
Audio level controls
I: AUTO/MAN (CH1) switch
J: AUDIO LEVEL (CH1) dial
K: AUTO/MAN (CH2) switch
L: AUDIO LEVEL (CH2) dial
Wind noise switches
G: LOW CUT (INPUT1) switch
M: LOW CUT (INPUT2) switch
1
Select the audio input source.
Set the INPUT1/INPUT2 (LINE/MIC/
MIC+48V) switch (D or F) based on
the device connected to INPUT1 jack
A/INPUT2 jack B.
Connected device
External audio device
(such as mixer)
Dynamic microphone or
microphone with built-in
battery
+48V powered
(phantom powered)
microphone
b Notes
• If the switch is set to MIC+48V and you connect
a device that is not compatible with +48V
power, it may damage the connected device.
Check the switch before connecting the device.
• To prevent unwanted noise when no audio
device is connected to the INPUT1 or INPUT2
jack, set the INPUT1/INPUT2 (LINE/MIC/
MIC+48V) switch (D or F) to LINE.
Switch
position
LINE
MIC
MIC+48V