Sony XDCAM PXW-X70 Operating Manual page 59

Item
[CC[MG/GR]]
[R GAIN]
[B GAIN]
DETAIL
To set items for the detail.
Item
[LEVEL]
[MANUAL SET]
COPY
To copy the settings of the picture profile to another picture profile number.
RESET
To reset the picture profile to the default setting.
Description and settings
Sets a color correct offset value.
-9 (greenish) to +9 (magentish)
Sets an R level.
-9 (low R level) to +9 (high R level)
Sets a B level.
-9 (low B level) to +9 (high B level)
Description and settings
Sets the detail level.
-7 to +7
[ON/OFF] : Turns on and off the manual detail adjustment.
Set to [ON] to enable the manual detail adjustment
(automatic optimization will not be performed).
[V/H BALANCE] : Sets the vertical (V) and horizontal (H) balance of
DETAIL.
-2 (off to the vertical (V) side) to +2 (off to the
horizontal (H) side)
[B/W BALANCE]: Selects the balance of the lower DETAIL (B) and
the upper DETAIL (W).
TYPE1 (off to the lower DETAIL (B) side) to
TYPE5 (off to the upper DETAIL (W) side)
[LIMIT] : Sets the limit level of DETAIL.
0 (Low limit level: likely to be limited) to 7 (High
limit level: not likely to be limited)
[CRISPENING] : Sets the crispening level.
0 (shallow crispening level) to 7 (deep crispening
level)
[HI-LIGHT DETAIL]:
Sets the DETAIL level in the high intensity areas.
0 to 4
59
Continued ,