Carrier 53P100C Owners And Installation Manual page 9

BEFORE OPERATION
Replacing Batteries
1
Remove the cover of the battery
compartment at the back of the remote
control by sliding it out in the direction of the
arrow.
NOTE
• Changing batteries should be done after turning off the unit.
• When the air conditioner does not operate normally after replacing the batteries, remove the batteries, refit and repress the RST button after 5 seconds.
Setting Current Time
4
Press the TA button with a sharp object and
the current time indication symbol flashes.
In the beginning, 6:00A.M. will flash.
.
RESERV CANCEL
6
Page 8
2
Remove the used batteries and insert new
batteries. The remote control uses two
batteries.(1.5V(L)R03x2)
5
Set the current time with the hour and the
minute buttons while the current time
indication flashes.
3
Press the RST button with a sharp object
to reset the remote control before closing
the cover of the battery compartment.
RESERV .
OFF
TA
6
Press the TA button again.
The flashing will stop and the current time
will be set.
.
RESERV CANCEL
2004.3.30, 6:32 PM
BEFORE OPERATIO