Timer Operation - Carrier 53P100C Owners And Installation Manual

UNIT OPERATION
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9

TIMER OPERATION

1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
ON Timer PROCEDURE
1
ON TIMER button ............................................................................
Press this button.
At start up, time is set at 6:00 A.M..
2
HOUR, MINUTE buttons ................................................................
Press these buttons to set the start-up time
desired while the ON Timer symbol is flashing.
3
RESERV. button ...............................................................................
Press this button by pointing the remote control towards
the receiver of the indoor unit.
• A receiving beep is heard.
• TIMER lamp of the indoor unit illuminates.
4
MODE, FAN, FLAP, and TEMP. buttons ......................................
Set the desired operation mode with these buttons.
About ON Timer
• When the ON Timer is set, the unit monitors the room temperature
for 1hour before the set time to make sure the room condition
is reached by the reserve a time.
• The actual on time of the unit is earlier than the reserved on time
by 0 to 40 minutes according to the difference between room
temperature and set temperature.
Page 13
OFF Timer PROCEDURE
1
OFF TIMER button ................................................................................
Press this button.
At start up, the time is set at 2:00 A.M..
2
HOUR, MINUTE buttons ......................................................................
Press these buttons to set the stop time desired
while the OFF Timer symbol is flashing.
3
RESERV. button .....................................................................................
Press this button by pointing the remote control towards
the receiver of the indoor unit.
• A receiving beep is heard.
• TIMER lamp of the indoor unit illuminates.
NOTE
• The current time is not indicated during the reservation of ON/OFF Timer.
• When you want to know the current time, press the CLOCK button and
you will see the current time for 5 seconds.
• If you reserve the ON Timer during operation, the unit will be operated continuously.
2004.3.30, 6:32 PM
11