Bosch VG4-SFPSCKT Installation Manual page 18

14 en | Troubleshooting
Issue
No Video present RJ-45 Connection Check the PWR/Link on the VG4-
F.01U.134.924 | 1.0 | 2009.09
Symptom
Installation Guide
Fiber Optic Media Converter
Resolution
SFPSCKT:
– If the LED is slowly Flashing Red,
then
Check all video connections from the
VG4 AutoDome.
– If the LED is rapidly Flashing
Red, then
Check the RJ-45 connector on the
VG4-SFPSCKT:
– If the right LED (Green) is not lit,
then no data is present at this
RJ-45 connection.
– If no LED lit on the RJ-45
connector, then there is a fault
with this connector, the RJ-45
cable, or the cable is not
connected to the CNFE2MC.
Check the RJ-45 connector on the
CNFE2MC:
– If the right LED (Green) is not lit,
then no data is present at this
RJ-45 connection.
– If no LED lit on the RJ-45
connector, then there is a fault
with this connector, the RJ-45
cable, or the cable is not
connected to the VG4-SFPSCKT.
Bosch Security Systems, Inc.