Bosch VG4-SFPSCKT Installation Manual page 16

12 en | Installing the Fiber Optic Module
12. Connect the RJ45 Ethernet patch cable (blue) to its socket
13. Route the appropriate fiber optic cable through the
14. Plug the fiber optic cable (LC or SC connector) into the
15. Close and secure the power supply box when finished.
16. Restore the power to the power supply box.
F.01U.134.924 | 1.0 | 2009.09
on the fiber optic module. Then attach the other end to the
female mating connector in the AutoDome pendant arm.
Note: If installing a Pipe or Roof mounted AutoDome, you
will need to provide the appropriate length Ethernet cable
with RJ45 connectors to reach between the AutoDome and
the power supply box.
conduit hole on the power supply box.
SFP module inside the power supply unit.
Installation Guide
Fiber Optic Media Converter
Bosch Security Systems, Inc.