Configure Router; Wireless Access Control - Tenda 11N Broadband Wireless Router User Manual

2. Configure Router 1:

Go to wireless section on Router 1 and specify WDS (or WDS Bridge) as its
1.
wireless working mode.
Manually enter Router 2's MAC address (Also, you can use the Scan option
2.
as mentioned above) and click OK to finish your settings.

2.4 Wireless Access Control

The Access Control feature allows you to specify a list of devices to Permit or
Forbid a connection to your wireless network via the devices' MAC addresses.
All other devices not listed as Permitted will be Forbidden and vice versa.
1. Select the wireless network (SSID) you wish to enable Access Control on.
2. MAC Address Filter: Select Permit or Forbid from the drop-down list.
11N Broadband Wireless Router
41 .